lvpecl uhf vcxo SD-X36AXXX series description the SD-X36AXXX series of voltage controlled crystal oscillators (vcxo) provides ultra high frequency with lvpecl complementary outputs. the outputs can be tri- stated for test automation or combining multiple clocks. the device is based on advanced pll multip lication for higher frequencies, and packaged in a miniature, low profile leadless cera mic smd package with 6 gold plated pads. applications and features ? wide frequency range ? 38.0mhz to 640.000mhz ? fiber channel; 10 gbe; infiniband; ne twork processors; soho routing ? high reliability - nel halt/hass qualified for crystal oscillator start-up conditions ? low phase noise, low jitter ? high shock resistance, to 1000g ? ultra high frequency ? absolute pull range (apr) to 100 ppm ? grounded lid and internal by-pass capacitor reduce emi ? rohs compliant, lead free construction 357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com crystal clock oscillators data sheet 0629f rev. a sd - x 36a x x x - freq package code absolute pull range, ppm sd 6 pad 5x7mm smd e 20 f 32 input voltage g 50 a 3.3v5% h 100 b 2.5v5% 9 customer specific enable option temperature range, c l enable low a 0 to 50 b 0 to 70 c -20 to 70 d -40 to 85 9 customer specific creating a part number
SD-X36AXXX series continued lvpecl uhf vcxo absolute maximum ratings parameter symbol value unit operating temperature range to -40 to +85 oc storage temperature range tst -50 to +90 oc supply voltage vcc -0.5 to 4.5 v enable/disable voltage ven/dis 0 to vcc v electrical parameters parameter symb conditions, note min typ max unit nominal frequency fo 38 640 mhz supply voltage vcc code a code b 3.135 2.375 3.3 2.5 3.465 2.625 v supply current icc 80 100 ma output logic type lvpecl load output to vcc-2v, or thevenin equivalent 50 ohm output levels voh vol overall vcc- 1.025 vcc- 1.620 v duty cycle (symmetry) at 50% of output voltage swing 45/55 50/50 55/45 % rise/fall time tr/tf 20 to 80, 80 to 20 % 0.5 0.7 ns jitter integrated j integrated from phase noise, 12 khz to 20 mhz , rms 0.4 ps wavecrest characterized random period, 155 mhz 622 mhz 3.5 6 ps accumul., pk-to-pk 155 mhz 622 mhz 20 40 ps phase noise ( f) 155 mhz @ 10 hz @100 hz @1 khz @10khz @100khz @1mhz @>10m -60 -90 -120 -130 -128 -144 -150 dbc/hz frequency stability f/f overall, including initial calibration, temperature, aging 10 years, shock and vibration @ vc=vcc/2 30 ppm control voltage range vc 0v vcc v setability vcs vc to set f at fo; t, vcc, load - nominal, as shipped 0.4 vcc 0.5 vcc 0.6 vcc v absolute pull range apr over all conditions, see part # creation 20,32, 50,100 ppm input impedance zin @ fmod < 100 khz 10 kohm modulation bandwidth at vc = vcc/2, -3db 10 khz enable low option pin 2 disabled pin 2 enabled cmos logic 1 or n/c cmos logic 0 0.7 vcc 0 vcc 0.3 vcc v 357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com rev. a crystal clock oscillators data sheet 0629f
rev. a crystal clock oscillators SD-X36AXXX series continued lvpecl uhf vcxo electrical connection pin connection 1 vco 2 enable 3 v ee 4 output 5 output complement 6 v cc environmental and mechanical characteristics operating temp. range see part # table mechanical shock per mil-std-202, method 213, cond. e thermal shock per mil-std-883, method 1011, cond. a vibration per mil-std-883, method 2007, cond. a hermetic seal leak rate less than 1x10 -8 atm.cc/s of helium soldering conditions see max reflow profile below maximum reflow profile 357 beloit street, p.o. box 457, burlington, wi 53105-0457 u.s.a. phone 262/763-3591 fax 262/763-2881 email: nelsales@nelfc.com www.nelfc.com
|
